Pro Series Wheel Spacers
RFX Pro Series wheel spacers are lighter and more durable than OEM.
Constructed from 7075-T6 aluminium and colour anodised to increase durability. This helps to reduce surface wear and lessens the amount of dirt entering the hub which in turn extends the life of the bearing.
Designed with a rear lip to help keep them hooked into the seals, this reduces the chance of falling out during maintenance, speeding up wheel changes.
RFX products are tested and used by many top Grand Prix and British Motocross teams.
7075-T6 Aluminium Construction. Colour anodised for durability. Machined rear location lip.
Tag Line
CNC Machined
For a tighter tolerance
Fitting Instructions
Start with the motorcycle on a box stand with the wheels raised from the ground. Remove the large spindle nut and loosen any pinch bolts on the lower fork leg. Remove the spindle from the wheel this may require the use of a brass punch and hammer if tight. Front wheel will now remove. The rear wheel should now be loose enough to push forward and lift the chain from the rear sprocket. Rear wheel will now remove. Remove the wheel spacers from the wheels. Clean in and around the seals with contact cleaner such as Maxima Electrical Contact and re-grease under the seal. Fit the new wheel spacers. Make sure to open the brake pads apart inside the brake callipers to give you extra room when re-fitting the wheel. Re-fit the wheels and push the spindles through. Re-fit the chain and set the proper chain tension by adjusting the axle blocks. Tighten the large spindle nuts to the correct torque setting. With the bike off the stand pump the front forks up and down to align the front forks then tighten the pinch bolts. Finally pump the brakes to re-align the callipers.
Color: Red Material: Aluminium
It started like so many other fantastic ideas: with a passion and a garage. Late in 2020, Greg Moto AB grew up, initially as a hobby business. But it wasn't long before the dream switched up and we took the step out on the road for real.
Today we have a heart that bolts in Staffanstorp, more specifically on Maskinvägen 1. There you will find our Physical store of over 1000 m², Distributed on two levels - a paradise for all engine lovers! Here is crowded helmets, clothes, boots and shelter in all sizes, with extra pride in our wide ladies' range (yes, we dare actually say that it is Sweden's largest).
But it doesn't stay there ....
We have built up a web shop with over 100,000 products Where you can easily find the right spare parts and accessories - whether you drive high, moped or something in between. With our smart search function you can quickly pick up what suits your model. Smooth, huh?
We are developing with you - and for you
We believe that a good buying experience is about more than just clicking home the right parts. Therefore, we are constantly working to make our store (both online and physically) more inspiring, more personal and above all more fun to visit. We listen to our customers, test new ideas and improve every detail - all to make you feel as safe as tagged when you shop with us.
So whether you are a beginner on two wheels, veteran with leather vest or just the desire to upgrade the helmet - Welcome to Greg Moto. Here people meet with gasoline in the blood and a smile behind the visor.
